Replace that worn out and weaker rag
joint and rusty old upper joint with this new Borgeson
steering universal joint kit.
Reduces play in your steering for a much 'tighter' steering system.
Select proper size of lower joint before ordering - either 3/4"-30 spline or 13/16"-36 spline.
A perfect solution for those with a body lift. Kit includes upper regular joint and lower vibration reducing steering joint and approximately 6" of DD shaft.
How do I determine which size ragjoint I need? All Scout II's from 1971 thru mid 1977 came from the factory with a 13/16" input and then from mid 1977 thru 1980 had a 3/4" input. If your steering box was replaced at some point in its life it may have had a change in input size. To best determine which input you have in this scenario use a 11/16" 12 point box end wrench and try to slip it over the input shaft of the steering box(steering box must be removed or ragjoint removed in order to perform this task). If the wrench slips over the input shaft then you have a 3/4" input. If it will NOT go over the input shaft then you have a 13/16" input.
MADE IN THE USA.
Reduces play in your steering for a much 'tighter' steering system.
Select proper size of lower joint before ordering - either 3/4"-30 spline or 13/16"-36 spline.
A perfect solution for those with a body lift. Kit includes upper regular joint and lower vibration reducing steering joint and approximately 6" of DD shaft.
How do I determine which size ragjoint I need? All Scout II's from 1971 thru mid 1977 came from the factory with a 13/16" input and then from mid 1977 thru 1980 had a 3/4" input. If your steering box was replaced at some point in its life it may have had a change in input size. To best determine which input you have in this scenario use a 11/16" 12 point box end wrench and try to slip it over the input shaft of the steering box(steering box must be removed or ragjoint removed in order to perform this task). If the wrench slips over the input shaft then you have a 3/4" input. If it will NOT go over the input shaft then you have a 13/16" input.
MADE IN THE USA.
