Have a bunch of slop in your Scout II steering system?
Chances are your ragjoint on the steering column is worn-out.
Replace it with an original oem re-manufactured unit.
For ALL 1971-80 Scout II, Terra or Traveler with power
steering.
Due to a shortage in available cores the core charge for
this item has gone up to $50. The core charge will be
applied to your invoice and will be refunded upon return of
a good useable, rebuildable core. Unless you are
performing an exact show quality restoration we recommend
purchasing our brand new rag joint or a Borgeson joint.
How do I determine which size ragjoint I need? All Scout
II's from 1971 thru mid 1977 came from the factory with a
13/16" input and then from mid 1977 thru 1980 had a 3/4"
input. If your steering box was replaced at some point
in its life it may have had a change in input size. To
best determine which input you have in this scenario use
a 11/16" 12 point box end wrench and try to slip it over
the input shaft of the steering box(steering box must be
removed or ragjoint removed in order to perform this task)
.If the wrench slips over the input shaft then you have a
3/4" input. If it will NOT go over the input shaft then
you have a 13/16" input.
Scout, Traveler, Terra and Travelall are trademarks of Scout Motors Inc. Their use has been licensed under Scout/Light Line Distributors, Inc. - IH Parts America is a Scout/Light Line Authorized Dealer.
